Enable paging

README.md

@@ -1,7 +1,7 @@
-# Blog OS (A Minimal x86 Kernel)
-[![Build Status](https://travis-ci.org/phil-opp/blog_os.svg?branch=post_1)](https://travis-ci.org/phil-opp/blog_os/branches)
+# Blog OS (Entering Longmode)
+[![Build Status](https://travis-ci.org/phil-opp/blog_os.svg?branch=post_2)](https://travis-ci.org/phil-opp/blog_os/branches)
 
-This repository contains the source code for the [A Minimal x86 Kernel](http://os.phil-opp.com/multiboot-kernel.html) post of the [Writing an OS in Rust](http://os.phil-opp.com) series.
+This repository contains the source code for the [Entering Longmode](http://os.phil-opp.com/entering-longmode.html) post of the [Writing an OS in Rust](http://os.phil-opp.com) series.
 
 **Check out the [master branch](https://github.com/phil-opp/blog_os) for more information.**
 

src/arch/x86_64/boot.asm

@@ -3,6 +3,147 @@ global start
 section .text
 bits 32
 start:
+    mov esp, stack_top
+
+    call check_multiboot
+    call check_cpuid
+    call check_long_mode
+
+    call set_up_page_tables
+    call enable_paging
+
     ; print `OK` to screen
     mov dword [0xb8000], 0x2f4b2f4f
     hlt
+
+check_multiboot:
+    cmp eax, 0x36d76289
+    jne .no_multiboot
+    ret
+.no_multiboot:
+    mov al, "0"
+    jmp error
+
+check_cpuid:
+    ; Check if CPUID is supported by attempting to flip the ID bit (bit 21)
+    ; in the FLAGS register. If we can flip it, CPUID is available.
+
+    ; Copy FLAGS in to EAX via stack
+    pushfd
+    pop eax
+
+    ; Copy to ECX as well for comparing later on
+    mov ecx, eax
+
+    ; Flip the ID bit
+    xor eax, 1 << 21
+
+    ; Copy EAX to FLAGS via the stack
+    push eax
+    popfd
+
+    ; Copy FLAGS back to EAX (with the flipped bit if CPUID is supported)
+    pushfd
+    pop eax
+
+    ; Restore FLAGS from the old version stored in ECX (i.e. flipping the
+    ; ID bit back if it was ever flipped).
+    push ecx
+    popfd
+
+    ; Compare EAX and ECX. If they are equal then that means the bit
+    ; wasn't flipped, and CPUID isn't supported.
+    cmp eax, ecx
+    je .no_cpuid
+    ret
+.no_cpuid:
+    mov al, "1"
+    jmp error
+
+check_long_mode:
+    ; test if extended processor info in available
+    mov eax, 0x80000000    ; implicit argument for cpuid
+    cpuid                  ; get highest supported argument
+    cmp eax, 0x80000001    ; it needs to be at least 0x80000001
+    jb .no_long_mode       ; if it's less, the CPU is too old for long mode
+
+    ; use extended info to test if long mode is available
+    mov eax, 0x80000001    ; argument for extended processor info
+    cpuid                  ; returns various feature bits in ecx and edx
+    test edx, 1 << 29      ; test if the LM-bit is set in the D-register
+    jz .no_long_mode       ; If it's not set, there is no long mode
+    ret
+.no_long_mode:
+    mov al, "2"
+    jmp error
+
+set_up_page_tables:
+    ; map first P4 entry to P3 table
+    mov eax, p3_table
+    or eax, 0b11 ; present + writable
+    mov [p4_table], eax
+
+    ; map first P3 entry to P2 table
+    mov eax, p2_table
+    or eax, 0b11 ; present + writable
+    mov [p3_table], eax
+
+    ; map each P2 entry to a huge 2MiB page
+    mov ecx, 0         ; counter variable
+
+.map_p2_table:
+    ; map ecx-th P2 entry to a huge page that starts at address 2MiB*ecx
+    mov eax, 0x200000  ; 2MiB
+    mul ecx            ; start address of ecx-th page
+    or eax, 0b10000011 ; present + writable + huge
+    mov [p2_table + ecx * 8], eax ; map ecx-th entry
+
+    inc ecx            ; increase counter
+    cmp ecx, 512       ; if counter == 512, the whole P2 table is mapped
+    jne .map_p2_table  ; else map the next entry
+
+    ret
+
+enable_paging:
+    ; load P4 to cr3 register (cpu uses this to access the P4 table)
+    mov eax, p4_table
+    mov cr3, eax
+
+    ; enable PAE-flag in cr4 (Physical Address Extension)
+    mov eax, cr4
+    or eax, 1 << 5
+    mov cr4, eax
+
+    ; set the long mode bit in the EFER MSR (model specific register)
+    mov ecx, 0xC0000080
+    rdmsr
+    or eax, 1 << 8
+    wrmsr
+
+    ; enable paging in the cr0 register
+    mov eax, cr0
+    or eax, 1 << 31
+    mov cr0, eax
+
+    ret
+
+; Prints `ERR: ` and the given error code to screen and hangs.
+; parameter: error code (in ascii) in al
+error:
+    mov dword [0xb8000], 0x4f524f45
+    mov dword [0xb8004], 0x4f3a4f52
+    mov dword [0xb8008], 0x4f204f20
+    mov byte  [0xb800a], al
+    hlt
+
+section .bss
+align 4096
+p4_table:
+    resb 4096
+p3_table:
+    resb 4096
+p2_table:
+    resb 4096
+stack_bottom:
+    resb 64
+stack_top: