Merge 128d456923 into 02fe09d56f

Change one of translator's github ID

blog/content/edition-2/posts/02-minimal-rust-kernel/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Bare Bones"
 # Please update this when updating the translation
 translation_based_on_commit = "7212ffaa8383122b1eb07fe1854814f99d2e1af4"
 # GitHub usernames of the people that translated this post
-translators = ["woodyZootopia", "JohnTitor"]
+translators = ["swnakamura", "JohnTitor"]
 +++
 
 この記事では、Rustで最小限の64bitカーネルを作ります。前の記事で作った[フリースタンディングなRustバイナリ][freestanding Rust binary]を下敷きにして、何かを画面に出力する、ブータブルディスクイメージを作ります。

blog/content/edition-2/posts/03-vga-text-buffer/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Bare Bones"
 # Please update this when updating the translation
 translation_based_on_commit = "bd6fbcb1c36705b2c474d7fcee387bfea1210851"
 # GitHub usernames of the people that translated this post
-translators = ["woodyZootopia", "JohnTitor"]
+translators = ["swnakamura", "JohnTitor"]
 +++
 
 [VGAテキストモード][VGA text mode]は画面にテキストを出力するシンプルな方法です。この記事では、すべてのunsafeな要素を別のモジュールにカプセル化することで、それを安全かつシンプルに扱えるようにするインターフェースを作ります。また、Rustの[フォーマッティングマクロ][formatting macros]のサポートも実装します。

blog/content/edition-2/posts/04-testing/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Bare Bones"
 # Please update this when updating the translation
 translation_based_on_commit = "dce5c9825bd4e7ea6c9530e999c9d58f80c585cc"
 # GitHub usernames of the people that translated this post
-translators = ["woodyZootopia", "JohnTitor"]
+translators = ["swnakamura", "JohnTitor"]
 +++
 
 この記事では、`no_std`な実行環境における<ruby>単体テスト<rp> (</rp><rt>unit test</rt><rp>) </rp></ruby>と<ruby>結合テスト<rp> (</rp><rt>integration test</rt><rp>) </rp></ruby>について学びます。Rustではカスタムテストフレームワークがサポートされているので、これを使ってカーネルの中でテスト関数を実行します。QEMUの外へとテストの結果を通知するため、QEMUと`bootimage`の様々な機能を使います。

blog/content/edition-2/posts/05-cpu-exceptions/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Interrupts"
 # Please update this when updating the translation
 translation_based_on_commit = "a8a6b725cff2e485bed76ff52ac1f18cec08cc7b"
 # GitHub usernames of the people that translated this post
-translators = ["woodyZootopia"]
+translators = ["swnakamura"]
 +++
 
 CPU例外は、例えば無効なメモリアドレスにアクセスしたときやゼロ除算したときなど、様々なミスによって発生します。それらに対処するために、ハンドラ関数を提供する **<ruby>割り込み記述子表<rp> (</rp><rt>interrupt descriptor table</rt><rp>) </rp></ruby>** を設定しなくてはなりません。この記事を読み終わる頃には、私達のカーネルは[ブレークポイント例外][breakpoint exceptions]を捕捉し、その後通常の実行を継続できるようになっているでしょう。

blog/content/edition-2/posts/07-hardware-interrupts/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Interrupts"
 # Please update this when updating the translation
 translation_based_on_commit = "81d4f49f153eb5f390681f5c13018dd2aa6be0b1"
 # GitHub usernames of the people that translated this post
-translators = ["shimomura1004", "woodyZootopia"]
+translators = ["shimomura1004", "swnakamura"]
 +++
 
 この記事では、ハードウェア割り込みを正しく CPU に転送するためにプログラム可能な割り込みコントローラの設定を行います。これらの割り込みに対処するため、例外ハンドラのときに行ったのと同じように割り込み記述子表に新しいエントリを追加しなくてはいけません。ここでは周期タイマ割り込みの受け方と、キーボードからの入力の受け方を学びます。

blog/content/edition-2/posts/08-paging-introduction/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Memory Management"
 # Please update this when updating the translation
 translation_based_on_commit = "3315bfe2f63571f5e6e924d58ed32afd8f39f892"
 # GitHub usernames of the people that translated this post
-translators = ["woodyZootopia", "JohnTitor"]
+translators = ["swnakamura", "JohnTitor"]
 +++
 
 この記事では**ページング**を紹介します。これは、私達のオペレーティングシステムにも使う、とても一般的なメモリ管理方式です。なぜメモリの分離が必要なのか、**セグメンテーション**がどういう仕組みなのか、**仮想メモリ**とは何なのか、ページングがいかにしてメモリ<ruby>断片化<rp> (</rp><rt>フラグメンテーション</rt><rp>) </rp></ruby>の問題を解決するのかを説明します。また、x86_64アーキテクチャにおける、マルチレベルページテーブルのレイアウトについても説明します。

blog/content/edition-2/posts/09-paging-implementation/index.ja.md

@@ -7,7 +7,7 @@ date = 2019-03-14
 [extra]
 chapter = "Memory Management"
 translation_based_on_commit = "27ab4518acbb132e327ed4f4f0508393e9d4d684"
-translators = ["woodyZootopia", "garasubo"]
+translators = ["swnakamura", "garasubo"]
 +++
 
 この記事では私達のカーネルをページングに対応させる方法についてお伝えします。まずページテーブルの物理フレームにカーネルがアクセスできるようにする様々な方法を示し、それらの利点と欠点について議論します。次にアドレス変換関数を、ついで新しい<ruby>対応付け<rp> (</rp><rt>マッピング</rt><rp>) </rp></ruby>を作るための関数を実装します。

blog/content/edition-2/posts/10-heap-allocation/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Memory Management"
 # Please update this when updating the translation
 translation_based_on_commit = "afeed7477bb19a29d94a96b8b0620fd241b0d55f"
 # GitHub usernames of the people that translated this post
-translators = ["woodyZootopia", "garasubo"]
+translators = ["swnakamura", "garasubo"]
 +++
 
 この記事では、私たちのカーネルにヒープ<ruby>割り当て<rp> (</rp><rt>アロケーション</rt><rp>) </rp></ruby>の機能を追加します。まず動的メモリの基礎を説明し、どのようにして借用チェッカがありがちなアロケーションエラーを防いでくれるのかを示します。その後Rustの基本的なアロケーションインターフェースを実装し、ヒープメモリ領域を作成し、アロケータクレートを設定します。この記事を終える頃には、Rustに組み込みの`alloc`クレートのすべてのアロケーション・コレクション型が私たちのカーネルで利用可能になっているでしょう。

blog/content/edition-2/posts/11-allocator-designs/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Memory Management"
 # Please update this when updating the translation
 translation_based_on_commit = "2e3230eca2275226ec33c2dfe7f98f2f4b9a48b4"
 # GitHub usernames of the people that translated this post
-translators = ["woodyZootopia"]
+translators = ["swnakamura"]
 +++
 
 この記事ではヒープアロケータをゼロから実装する方法を説明します。バンプアロケータ、連結リストアロケータ、固定サイズブロックアロケータなどの様々なアロケータの設計を示し、それらについて議論します。3つそれぞれのデザインについて、私たちのカーネルに使える基礎的な実装を作ります。

blog/content/edition-2/posts/11-allocator-designs/index.md

@@ -570,11 +570,26 @@ use super::align_up;
 use core::mem;
 
 impl LinkedListAllocator {
+
+    /// Aligns a given address up to a multiple of
+    /// `mem::align_of::<ListNode>, which is 8 bytes
+    /// for x86_64.
+    fn align_to_list_node(addr: usize) -> usize {
+        align_up(addr, mem::align_of::<ListNode>())
+    }
+
+    /// Checks to make sure that alignment and size conditions
+    /// to store a `ListNode` are guaranteed for a given region
+    /// [addr, addr + size).
+    fn is_valid_region(addr: usize, size: usize) -> bool {
+        addr == Self::align_to_list_node(addr) &&
+            size >= mem::size_of::<ListNode>()
+    }
+
     /// Adds the given memory region to the front of the list.
     unsafe fn add_free_region(&mut self, addr: usize, size: usize) {
-        // ensure that the freed region is capable of holding ListNode
-        assert_eq!(align_up(addr, mem::align_of::<ListNode>()), addr);
-        assert!(size >= mem::size_of::<ListNode>());
+        // ensure that the region is capable of holding ListNode
+        assert!(Self::is_valid_region(addr, size));
 
         // create a new list node and append it at the start of the list
         let mut node = ListNode::new(size);
@@ -664,18 +679,34 @@ impl LinkedListAllocator {
     fn alloc_from_region(region: &ListNode, size: usize, align: usize)
         -> Result<usize, ()>
     {
-        let alloc_start = align_up(region.start_addr(), align);
-        let alloc_end = alloc_start.checked_add(size).ok_or(())?;
+        let mut alloc_start = align_up(region.start_addr(), align);
 
+        if alloc_start != region.start_addr() {
+            // We have some potential wasted space at the beginning of the region
+            // that cannot be used due to alignment constraints. We want to be
+            // able to recycle this space as well in our linked list. Otherwise
+            // we may never be able to reclaim this space.
+            // We need to ensure that there is enough space up front for a `ListNode`
+            // so we need to realign alloc_start after `size_of::<ListNode>` bytes
+            // from `region.start_addr()`.
+            // In practice, this can occur in x86_64 only when align is set to 16 bytes.
+            let pushed_start_addr = region
+                .start_addr()
+                .checked_add(mem::size_of::<ListNode>())
+                .ok_or(())?;
+            alloc_start = align_up(pushed_start_addr, align);
+        }
+
+        let alloc_end = alloc_start.checked_add(size).ok_or(())?;
         if alloc_end > region.end_addr() {
             // region too small
             return Err(());
         }
 
         let excess_size = region.end_addr() - alloc_end;
-        if excess_size > 0 && excess_size < mem::size_of::<ListNode>() {
-            // rest of region too small to hold a ListNode (required because the
-            // allocation splits the region in a used and a free part)
+        if excess_size > 0 && !Self::is_valid_region(alloc_end, excess_size) {
+            // Improper alignment or the rest of region too small to hold a ListNode (required
+            // because the allocation splits the region into a used and up to two free parts).
             return Err(());
         }
 
@@ -687,7 +718,16 @@ impl LinkedListAllocator {
 
 First, the function calculates the start and end address of a potential allocation, using the `align_up` function we defined earlier and the [`checked_add`] method. If an overflow occurs or if the end address is behind the end address of the region, the allocation doesn't fit in the region and we return an error.
 
-The function performs a less obvious check after that. This check is necessary because most of the time an allocation does not fit a suitable region perfectly, so that a part of the region remains usable after the allocation. This part of the region must store its own `ListNode` after the allocation, so it must be large enough to do so. The check verifies exactly that: either the allocation fits perfectly (`excess_size == 0`) or the excess size is large enough to store a `ListNode`.
+The function performs a couple of less obvious checks on top of that. When we first perform `align_up` we may get an `alloc_start` that is not the same as `region.start_addr()`. In this case, there can still be some free memory we need to keep track of between `region.start_addr()` (inclusive) to this initially aligned `alloc_start` (exclusive). We need to ensure that this region is suitable for storing a `ListNode` by performing the alignment and size checks in `is_valid_region`.
+
+As `region.start_addr()` is guaranteed to satisfy the alignment condition of `ListNode`, we technically only need to guarantee that the size is not too small. We try and realign after accounting for this space to store one `ListNode` instance after `region.start_addr()`. This may end up pushing our end address out of our region, in which case this entire region we are checking will not be sufficient.
+
+It is interesting to note that this situation can occur in one edge case in the 64-bit architecture we are targeting, where `align` is set to 16 bytes and `region.start_addr()` happens to be some number `16*n + 8`. `alloc_start` would then be set to `16*(n+1)`, leaving us `head_excess_size` of just 8 bytes, which would be insufficient to store the 16 bytes required for a `ListNode`.
+
+We could also have some free memory between `alloc_end` (inclusive) to `region.end_addr()` (exclusive). Here `alloc_end` (in general) is not guaranteed to satisfy the alignment condition of `ListNode`, nor is there a guarantee that the remaining space is sufficient to store a `ListNode`. This check is necessary because most of the time an allocation does not fit a suitable region perfectly, so that a part of the region remains usable after the allocation. This part of the region must store its own `ListNode` after the allocation, so it must be large enough to do so, and it must satisfy the alignment condition, which is exactly what our `is_valid_region` method performs.
+
+We shall soon see how we will actually modify the requested layout size and alignment in our implementation of `GlobalAlloc::alloc()` for the `LinkedListAllocator` to ensure that it additionally conforms to the alignment requirements for storing a `ListNode`. This is essential to ensure that `GlobalAllocator::dealloc()` can successfully add the region back into our linked list.
+
 
 #### Implementing `GlobalAlloc`
 
@@ -712,10 +752,20 @@ unsafe impl GlobalAlloc for Locked<LinkedListAllocator> {
 
         if let Some((region, alloc_start)) = allocator.find_region(size, align) {
             let alloc_end = alloc_start.checked_add(size).expect("overflow");
-            let excess_size = region.end_addr() - alloc_end;
-            if excess_size > 0 {
-                allocator.add_free_region(alloc_end, excess_size);
+
+            let start_addr = region.start_addr();
+            let end_addr = region.end_addr();
+
+            let tail_excess_size = end_addr - alloc_end;
+            if tail_excess_size > 0 {
+                allocator.add_free_region(alloc_end, tail_excess_size);
             }
+
+            let head_excess_size = alloc_start - start_addr;
+            if head_excess_size > 0 {
+                allocator.add_free_region(start_addr, head_excess_size);
+            }
+
             alloc_start as *mut u8
         } else {
             ptr::null_mut()
@@ -735,7 +785,7 @@ Let's start with the `dealloc` method because it is simpler: First, it performs
 
 The `alloc` method is a bit more complex. It starts with the same layout adjustments and also calls the [`Mutex::lock`] function to receive a mutable allocator reference. Then it uses the `find_region` method to find a suitable memory region for the allocation and remove it from the list. If this doesn't succeed and `None` is returned, it returns `null_mut` to signal an error as there is no suitable memory region.
 
-In the success case, the `find_region` method returns a tuple of the suitable region (no longer in the list) and the start address of the allocation. Using `alloc_start`, the allocation size, and the end address of the region, it calculates the end address of the allocation and the excess size again. If the excess size is not null, it calls `add_free_region` to add the excess size of the memory region back to the free list. Finally, it returns the `alloc_start` address casted as a `*mut u8` pointer.
+In the success case, the `find_region` method returns a tuple of the suitable region (no longer in the list) and the start address of the allocation. Using `alloc_start`, the allocation size, and the end address of the region, it calculates the end address of the allocation and the excess free fragments that are usable again. If the excess sizes are not zero, it calls `add_free_region` to add the excess sizes of the memory regions back to the free list. Finally, it returns the `alloc_start` address casted as a `*mut u8` pointer.
 
 #### Layout Adjustments
 
@@ -797,6 +847,51 @@ many_boxes_long_lived... [ok]
 
 This shows that our linked list allocator is able to reuse freed memory for subsequent allocations.
 
+Additionally, to test that we are not leaking any excess segments due to `alloc_start` realignment we can add a simple test case:
+
+```rust
+// in tests/heap_allocation.rs
+
+#[test_case]
+fn head_excess_reuse() {
+    #[derive(Debug, Clone, PartialEq, Eq)]
+    #[repr(C, align(8))]
+    struct A(u128, u64);
+
+    assert_eq!(8, align_of::<A>());
+    assert_eq!(24, size_of::<A>()); // 24 % 16 = 8
+
+    #[derive(Debug, Clone, PartialEq, Eq)]
+    #[repr(C, align(16))]
+    struct B(u128, u64);
+
+    assert_eq!(16, align_of::<B>());
+    assert_eq!(32, size_of::<B>());
+
+    let a1 = Box::new(A(1, 1));
+    let b1 = Box::new(B(1, 1));
+    let a2 = Box::new(A(2, 2));
+
+    assert_eq!(*a1, A(1, 1));
+    assert_eq!(*b1, B(1, 1));
+    assert_eq!(*a2, A(2, 2));
+
+    let a1_raw = Box::into_raw(a1) as usize;
+    let b1_raw = Box::into_raw(b1) as usize;
+    let a2_raw = Box::into_raw(a2) as usize;
+
+    assert_eq!(HEAP_START, a1);
+    assert_eq!(HEAP_START + 48, b1);
+    assert_eq!(HEAP_START + 24, a2);
+}
+```
+
+In this test case we start off with two identical structs `A` and `B`, with different alignment requirements as specified in their struct `#[repr]` attributes. Instances of `A` will have addresses that are a multiple of 8 and those of `B` will have addresses that are a multiple of `16`.
+
+`a1`, an instance of struct `A` on the heap, takes up space from `HEAP_START` to `HEAP_START + 24`, as `HEAP_START` is a multiple of 8 already. `b1` is an instance of struct `B` on the heap, but it needs an address that is a multiple of 16. Therefore, although `HEAP_START + 24` is available, our `alloc_from_region` will first attempt to set `alloc_start = HEAP_START + 32`. However, this will not leave enough room to store a `ListNode` in the 8 bytes between `HEAP_START + 24` and `HEAP_START + 32`. Next, it will attempt to set `alloc_start = HEAP_START + 48` to satisfy both the alignment constraint and to allow a `ListNode` to account for the excess size at the head end of this region.
+
+Because we are adding the `head_excess_size` fragment after `tail_excess_size` fragment in our `alloc` implementation, and because our linked list implementation follows LIFO (Last In First Out) ordering, our linked list will first search the `head_excess_size` region first on a new heap alloc request. We exploit this fact in this test by trying to allocate `a2`, which is an instance of struct `A`, which should fit neatly in the 24 bytes that were recycled from `HEAP_START + 24` to `HEAP_START + 48` as a part of the `head_excess_size` fragment from the previous allocation for `b1`. We can see that in our final lines of this test we are leaking these Boxed pointers and casting them to `usize` to help perform these assertions to ensure that our linked list allocator accounted for all the excess fragments.
+
 ### Discussion
 
 In contrast to the bump allocator, the linked list allocator is much more suitable as a general-purpose allocator, mainly because it is able to directly reuse freed memory. However, it also has some drawbacks. Some of them are only caused by our basic implementation, but there are also fundamental drawbacks of the allocator design itself.

blog/content/edition-2/posts/12-async-await/index.ja.md

@@ -9,7 +9,7 @@ chapter = "Multitasking"
 # Please update this when updating the translation
 translation_based_on_commit = "bf4f88107966c7ab1327c3cdc0ebfbd76bad5c5f"
 # GitHub usernames of the authors of this translation
-translators = ["kahirokunn", "garasubo", "sozysozbot", "woodyZootopia"]
+translators = ["kahirokunn", "garasubo", "sozysozbot", "swnakamura"]
 # GitHub usernames of the people that contributed to this translation
 translation_contributors = ["asami-kawasaki", "Foo-x"]
 +++